Miter Saw

At glance about Miter Saw

The miter saw is a really great power tool to have. The miter saw is able to provide you with the ability to make accurate, angled cuts on the edge of most materials. Below, we will go through some of the major things to look out for when using a miter saw.

Miter saws are available in three different types, namely standard, compound and sliding miter saws. The standard miter saw is a basic miter saw that will make a 90 degree cut though materials at angles between 45 degrees to left and right. The blade is kept aligned by use of an angle scale and locking device.


The compound miter saw is able to tilt the blade to a specific angle to create a compound cut, hence the name. The sliding miter saw is able to slide on a horizontal arm. The saw can be pushed through a material thus allowing a much larger and wider piece of materials to be cut

We will need to decide how much power a saw will need according to the job they will be working on. The power of a toll is measured in an amperage rating or horsepower. Standard miter saw generally operate at 12 to 15 amps and 120 volts. However, if we require much larger stock to be cut, we might need to consider industrial strength machinery that will be much larger and may require modified wiring.

When looking at buying a miter saw, we will obviously need to consider our own budget. Miter saw can range from $100 to $1500. If it is a tool that we see ourselves using on a regular basis, it might be worth it invest in a more expensive, quality saw.

When working on a project, we must ensure that there will be adequate space to work in. We might need a work bench or we might even need to work on the floor when it comes to very long materials.
It is very important to go through the miter saw instructional guide book. There might be important information with regards to safety precautions that we might to be aware of before beginning to use the tool.

We need to familiarize ourselves with the different parts of the miter saw. We should find the following on most miter saw: angle indicator, blade guard, power switch, locking mechanism used for keeping the saw in position when not in use

Before turning the miter saw on, we should raise and lower the saw a few times. This will help us get comfortable with the path the blade will take as it cuts. This might help us avoid accidents when the saw is in actual use.

Unless we are very confident, we should start with small pieces of stock to test the miter saw. We should make sure that the piece is long enough to be able to rest against the saw's bench as it is cut. Very small pieces are difficult to cut if they are not secured with clamps as it is cut.

We should try to make different cuts with different size and types of stock. We should do this until you feel absolutely comfortable with using the miter saw. We should keep experimenting with the different functions of the saw. There are bound to be handy trick on the saws that will make using it a pleasure.

If we need a more information about miter saw, we can go to Amazon to find out what is the best one we need for.